Pilz PSS67 F 16DI SB-T Instrukcja Użytkownika Pobierz pdf (Strona 39)

8-1Operating Manual: PSS67 F 16DI SB-T

SafetyBUS p Interface

The module is connected to SafetyBUS p using a 5-pin A-coded M12

connector (X9). A 5-pin A-coded M12 socket (X10) is available to distribute

the bus signal to the other bus subscribers.

The X10 socket can also be used for bus subscriber termination.

To avoid reflection on the bus cable, the last bus subscriber must be fitted

with a terminating resistor. If the module is connected using 1:1 connection

cable, the terminating resistor is plugged into the free X10 socket . The

M12 terminator (Order no. 311 032) PSS SB M12 TERMINATOR is used

for termination via the SafetyBUS p socket.

1: Shield

2: n.c.

3: CAN_GND (white)

4: CAN_H (green)

5: CAN_L

n.c. = not connected

X9 (male connector) X10 (female connector)

Fig. 8-1 Pin assignment of the SafetyBUS p interface

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

Brak uwag

Pilz PSS67 F 16DI SB-T Instrukcja Użytkownika Strona 39